Gear Linkage Fault On Vauxhall Corsa C

Gear Linkage Fault On Vauxhall Corsa C

I have fitted the m-tech short shifter as my gear linkage had broken, the play in the ball bearing joint is what was putting out the gear changes Video Rating: 2 / 5 CRAZY WIPERS! First intermittant, then speed one, then intermittant again. What’s the problem? Incoming search terms: vauxhall combo van faults yhs-fh_lsonsw 5 [...]

Gear Linkage Fault On Vauxhall Corsa C

I have fitted the m-tech short shifter as my gear linkage had broken, the play in the ball bearing joint is what was putting out the gear changes
Video Rating: 2 / 5

CRAZY WIPERS! First intermittant, then speed one, then intermittant again. What’s the problem?

Incoming search terms:

  • vauxhall combo van faults
  • yhs-fh_lsonsw
  • 5 speed vauxhall astra j gear lever
  • how to change gear linkage on combo
  • how to fit gear linkage on vauxhall corsa
  • opel corsa linkage diagram
  • utube how to align gear linkage corsa combo
  • vauxhall combo gear fault
  • vauxhall corsa gear linkage alignment

25

  1. darren3965 says:
    Posted June 9, 2012 at 17:50 | Permalink

    shite useless video !

  2. meshithead says:
    Posted June 9, 2012 at 17:53 | Permalink

    Was this recorded with toothbrush or potato?

  3. aamir93 says:
    Posted June 9, 2012 at 18:20 | Permalink

    Happened to me 2 weeks after i bought my car (N) only cost £80 for a new all metal one though:)

  4. butch1709 says:
    Posted June 9, 2012 at 18:24 | Permalink

    Just happened to me … Is it pricey to get sorted?

  5. Nayboi1 says:
    Posted June 9, 2012 at 18:53 | Permalink

    thts exactly wht happened to mine :@

  6. sixstring10 says:
    Posted June 9, 2012 at 19:01 | Permalink

    I got the same problem.
    Not good to leave it too long though. Mine has started popping the fuse and to have your windscreen wipers fail on you while doing 70mph on the motor way is deadly.

  7. Rustadude98 says:
    Posted June 9, 2012 at 19:14 | Permalink

    4. Once the above step has been carried out, you can either rivet the panel or using small screws (make sure the screws are slightly larger than the holes so they will create their own thread when tightened), screw back into place.

  8. Rustadude98 says:
    Posted June 9, 2012 at 19:41 | Permalink

    2 Once removed you will see two contacts on the rear of the panel you have just removed and the chances are you will see that at least one if not both contacts are worn down or are missing contacts at their ends.

    3 As long as they are not seriously worn, you can bend the contacts downward to ensure contact is made with the copper lines on the back of the toothed wheel.

  9. Rustadude98 says:
    Posted June 9, 2012 at 19:42 | Permalink

    It is worth noting that this fault is a potential MOT failure.

    If your vehicle suffers from the above fault, 9 times out of 10 it will be the motor.

    Before purchasing a new motor, if you are handy at DIY, they are usually repairable. Before attempting repair you will need some small screws, or rivets.

    1 You can drill out the rivets holding the top panel in place (this is the panel that has two wires connecting through it) you can also lever around the panel until the rivet heads detach

  10. Rustadude98 says:
    Posted June 9, 2012 at 19:56 | Permalink

    During my time repairing electrical parts on vehicles, I have noticed quite a large number of Astra Mk4s with faulty wipers, faulty as in they do not park correctly and stop mid screen on intermittent wipe. A large number of these faults I have found to be caused by the contacts inside the motor wearing away or breaking. On these vehicles the intermittent timing is controlled by a multi-timer unit and the parking is largely controlled by contacts inside the motor.

  11. Rustadude98 says:
    Posted June 9, 2012 at 20:16 | Permalink

    same happend to my dad! he followed these instructions though and it worked! saved himself some money

    Do your wipers not park correctly when turned off, do the wipers stop mid screen on intermittent wipe setting, if so read on.

  12. gazlad1985 says:
    Posted June 9, 2012 at 20:33 | Permalink

    see this every day you only need replace the wiper motor under the slam panel

  13. astramanjim says:
    Posted June 9, 2012 at 20:35 | Permalink

    looks like you have a fault with your wipers

  14. supyto says:
    Posted June 9, 2012 at 20:35 | Permalink

    the same thing on my corsa fuck the wauxhalls………. cheap cars but u invest more in the year then u pay for the car……….

  15. 2009jimmy2009 says:
    Posted June 9, 2012 at 21:31 | Permalink

    DEF THE MOTOR, IVE DONE LOADS!!!

  16. yjustin says:
    Posted June 9, 2012 at 21:46 | Permalink

    It would be the wiper link inside which connects to the motor.

  17. eddierodden says:
    Posted June 9, 2012 at 22:45 | Permalink

    Mine does the same, vauxhall quoted me £165 to fix, total rip off!

  18. D114BCW says:
    Posted June 9, 2012 at 23:37 | Permalink

    How good are Vauxhalls, i have a mk4 and its the shitest thing ever,

  19. Ryan18181 says:
    Posted June 9, 2012 at 23:45 | Permalink

    this happens to mine aswell, intermittent and windscreen wash get stuck, have to put it on fast and then try and time it.

  20. bornsniper says:
    Posted June 10, 2012 at 00:11 | Permalink

    motors nacked, mine did the same, go to scrappers get em for about a fiver

  21. sanny87 says:
    Posted June 10, 2012 at 00:44 | Permalink

    how much does a new motor cost?

  22. danpatmickey247 says:
    Posted June 10, 2012 at 00:46 | Permalink

    lol! I have this problem too!!! Gonna get it sorted now! Thanks ^_^

  23. gbalele says:
    Posted June 10, 2012 at 01:34 | Permalink

    lol…park street

  24. shavenwookiee5 says:
    Posted June 10, 2012 at 02:21 | Permalink

    Thanks for the advise! Yeah, the people at Migweb argee that its the motor at fault.

  25. nereesa85 says:
    Posted June 10, 2012 at 03:17 | Permalink

    ha thought it was just mine that did this!!! My boyf put a new front wiper mechanism and motor in it, solved the problem.


*